Fiberglass self-adhesive mesh

Internal wall insulation

The inner wall thermal insulation and alkali-resistant glass fiber mesh is made of medium-alkali or alkali-free glass fiber mesh cloth as the base material and then coated with modified acrylate copolymer glue. It has light weight, high strength, high temperature resistance, alkali resistance, waterproof,

Fiberglass Mesh &amp

Fiberglass Mesh &amp

Corrosion resistance, crack resistance, dimensional stability and other characteristics. It can effectively avoid the contraction of the overall surface tension of the plastering layer and the cracking caused by external forces. The light and thin mesh cloth is often used in wall renovation and internal wall insulation. Mesh: 5mm*5mm, 4mm*4mm Weight: 80g---165g/㎡ Width: 1000mm----2000mm Length: 50m—300m or according to customer requirements.

External wall insulation

External wall insulation grid cloth (glass fiber grid cloth) is made of medium-alkali or alkali-free glass fiber yarn as the raw material, woven into glass fiber grid cloth as the base material, and then coated with acrylic copolymer solution and dried. A new type of alkali-resistant product. The product has the characteristics of stable structure, high strength, good alkali resistance, corrosion resistance, crack resistance, etc., the best enhancement effect, and the construction is simple and easy. It is mainly used for cement, gypsum, wall, building and other structures to strengthen the internal and external surfaces and prevent cracking. It is a new type of building material for external wall insulation engineering.

Mesh size: 5x5mm, 4x5mm or 4x4mm

2. Weight per square gram: 80g- -160g

3. Length of each roll: 50m, 100m or 200m

4. Width of each roll: 1m- -2 m

5. Color: white (standard), blue, green or other colors;

6. Packaging: Each roll is blister packaging, four or six rolls in a carton, and a 40-foot container can hold 80,000- -150,000 square meters;

Reinforced material

GRC product reinforced mesh cloth is made of glass fiber woven fabric as the base material, and is processed by polymer alkali resistant emulsion.

The product has high strength, good alkali resistance, and can resist the rot of alkaline substances for a long time. It is made of cement concrete

It is an ideal reinforcement material for products, GRC wall panels and GRC components.

Conventional specifications:

1 Mesh size: 8mm × 8mm 10mm × 10mm 12mm × 12mm

2 Width: 60 cm 90 cm 1 meter

3 Weight per square gram: 125 grams

4 Length of each roll: 100 meters or 50 meters

5 colors; white (standard), yellow, green or other colors.

6 Packaging: can be packaged according to customer requirements.

7 Special specifications and hardness can be made according to customer requirements.

Self-adhesive tape

Purpose: repair dry board walls, gypsum board joints, various wall cracks and other wall damage

Main performance: excellent alkali resistance, durability: high tensile strength and deformation resistance, anti-crack: no deterioration, no foaming: excellent self-adhesiveness, no need to pre-prime, quick use, easy construction.

Specification: 8×8.9×9 mesh/inch: 55-85 g/m².

Width: 25-1000 mm; length: 10-153 meters.

Color: usually white.

Construction method:

1. Keep the walls clean and dry.

2. Put tape on the cracks and press tightly.

3. Make sure that the gap is covered by tape, then use a knife to cut off the excess tape, and finally apply the mortar.

4. Let it air dry, and then lightly sand it with a construction hammer.

5. Fill enough paint to make the wall surface smooth.

6. Cut off the leaking tape. Then, pay attention that all the cracks have been properly repaired, and use fine composite materials to modify the surrounding areas of the joints to make them look as clean as new.